Testing WebDav clients

Author Message

Terje J. Hanssen

Sunday 03 April 2005 3:24:41 pm

Does eZ System have a demo site to test WebDav clients on?
Konqueror is mentioned, but I wished to also test Gnome 2 Nautilus to see if it works.

Ekkehard Dörre

Monday 04 April 2005 12:21:59 am

Hi,

it's on the todo list since 22/10/2003:

http://ez.no/community/bugs/demo_of_webdav_on_ezno

Greetings, ekke

http://www.coolscreen.de - Over 40 years of certified eZ Publish know-how: http://www.cjw-network.com
CJW Newsletter: http://projects.ez.no/cjw_newsletter - http://cjw-network.com/en/ez-publ...w-newsletter-multi-channel-marketing

Kristian Hole

Tuesday 05 April 2005 11:05:04 am

I think the eZ publish liveCD has the webdav server set up. I suggest you try to download that, and try your clients on that.

http://ez.no/ez_publish/demo

Kristian

http://ez.no/ez_publish/documenta...tricks/show_which_templates_are_used
http://ez.no/doc/ez_publish/techn...te_operators/miscellaneous/attribute

Terje J. Hanssen

Tuesday 05 April 2005 11:19:32 am

I tried that. However, this demo CD based on Debian 10 (I think) hung on boot after Probing for all hardware on my system and never come further..

Previous I have used both Suse Linux Demo CDs and Sun Java Desktop/Linux Demo CDs with succeed. I have also installed these distros.

Terje J. Hanssen

Kristian Hole

Wednesday 06 April 2005 4:36:32 am

The LiveCD is based on Mandrake 10.1. Mandrake has very good hardwaresupport, so it works for most computers.

Then you can either to try the LiveCD on an other computer or configure webdav on your eZ publish installation.

This describes how to configure webdav for your page.
http://ez.no/ez_publish/documentation/configuration/configuration/webdav_setup

Kristian

http://ez.no/ez_publish/documenta...tricks/show_which_templates_are_used
http://ez.no/doc/ez_publish/techn...te_operators/miscellaneous/attribute

Bård Farstad

Wednesday 06 April 2005 5:18:00 am

Terje,

did you test the CD on a computer with more than 256MB of RAM?

If the CD halts during boot it can also be something wrong when the CD was burnt. You could try to burn another CD and verify the burn to make sure that no error occured during the burn.

--bård

Documentation: http://ez.no/doc

Terje J. Hanssen

Wednesday 06 April 2005 4:48:41 pm

Bård,

Yes, my AMD K7 based PC has 512 Mb RAM. The rest of the hardware mostly consist of Ethernet card, a couple of Adaptec scsi and USB cards (currently attached to scsi Epson scanner, yamaha cdrw and usb digitalcamera), ide 60 Mb ATA HD and HP dvd writer, Pinnacle dvd-500 video editing card, Creative SB Audigy LS sound card installed. The latter should be supported in Alsa 1.0.7, while I think Alsa 1.0.5 was on the Mandrake based demo live cd.

However, I have a multiboot GRUB setup on this K7 PC of 5 installed OS: legacy Win98+2k, SJDS/Linux R2, SJDS/Linux R3 beta and Suse Linux 9.1Pro. So far I have only got the soundcard to work on Windows, not for any of the three Linux distros.
Therefore I would neither think this should be a problem for the eZp demo live cd. As I mentioned, live demo cd's for JDS and Suse did work, while however I had problems with a NLD9 demo cd delievered from Linux-magagasinet.

I noticed the following last messages during the startup of eZp live cd before it stops:
(after building the file systems and probing scsi PCI controllers)
HW detect - Main:
AMD-756 to USB Open Host controller Failed!
(Adaptec modules were loaded)
HW detect: Starting Probeall
Probing devices.
Here the startup process stops (hangs)

The demo CD was burned on this PC on Win2k with Veritas RecordNow DX and Hp dvd writer. This has worked well before burning bootable install CDs for JDS/Linux.

I veryfied there is nothing wrong with the demo CD, as I got another, little older AMD K6 PC to startup correct. I has less 384 Mb RAM, less hardware and disk, and is setup as a dualboot WinXP and JDS/Linux.

Is there available a quickstart or getting started guide for the Demo CD?
I encountered the following problems:
Admin interface:
User name and password to login?
I tried to register, but was not able to enter correct mailadress, because "@" was typed as "2" (exponent, NO keyboard)?

Konqueror displayed near unreadable small fonts and would neither increase the fonts. Therefore I started eZ publish withe the included Mozilla/Firefox instead, which displayed and scaled font sizes ok. However the same "@" typing problem as for Konqueror.
I tried the WebDAV interface link from Firefox, but it didn't work and reported:
webdav is not a registered protocol.
Isn't WebDAV supported or set up in Firefox? And does Opera 8 and Gnome2 Nautilus support WebDAV?

Terje J. Hanssen

Bård Farstad

Monday 11 April 2005 4:44:29 am

Terje,

I do not know why the demo CD does not work on your computer. You can try the LiveCD mailinglists, mabye they know. Or file a bugreport to mandrake about this.

You can change the keyboard by clicking on the flags in the lower right corner of your desktop after the CD is booted.

Information about the CD is shown once the CD boots. The password and username is written there. Username: admin and password: publish.

WebDAV is only supported in Konqueror on the LiveCD.

--bård

Documentation: http://ez.no/doc

Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2014 eZ Systems AS (except where otherwise noted). All rights reserved.