Forums / Install & configuration / Adding ezflow to an ezwebin site

Adding ezflow to an ezwebin site

Previous topic

Install & configuration

Next topic

Author	Message
Marco Zinn	Saturday 04 June 2011 10:30:00 am Hi there, i'm trying to add ezflow to an existing ez 4.4 site, which is currently running ezwebin. Unfortunatly, the docs for ezflow do not seem to handle this szenario: It's only "install it in the first place with the wizard" or "upgrade it". I downloaded various packages from http://packages.ez.no/ezpublish/4.5/4.5.0/ and installed them. I activated the extension and can add the new "layout" datatype to any class (e.g. my frontpages). I also applied the SQL stuff from the ezflow extension to create the new ezm* tables. But the layout only shows one zone ("Global Layout") or no zones at all, when i edit the class or the object with a "layout" datatype. zone.ini and block ini files look fine to me. But i muss the other layouts (2,3,4 zones). Is there any good documentation available or do you have a clue where to look for? Log-Files do not give any usefull hint. Marco http://www.hyperroad-design.com
SEBBANE Alexandre	Saturday 04 June 2011 11:03:34 am Hello the zones are contentclass defined : see the zone.ini configration file you should had your template write in it : i mean if i want to had a lyout to the article contentclass , i add it bby administration AND i add it in this config file like that : [GlobalZoneLayout] ZoneTypeName=Global zone layout Zones[]=main ZoneName[main]=Global zone ZoneThumbnail=globalzone_layout.gif Template=globalzonelayout.tpl AvailableForClasses[]=global_layout AvailableForClasses[]=article <- add this line for your content class on all zoning you want. i hope that helps you. Alexandre Paris, France
Marco Zinn	Saturday 04 June 2011 3:39:17 pm Hello Alexandre, I thought, i had read every line of those 2 INI files, but i overlooked that one. AvailableForClasses[]=my_class_identifier worked perfectly! Merci beaucoup! Marco http://www.hyperroad-design.com

Author

Message

Marco Zinn

Saturday 04 June 2011 10:30:00 am

Hi there,

i'm trying to add ezflow to an existing ez 4.4 site, which is currently running ezwebin.

Unfortunatly, the docs for ezflow do not seem to handle this szenario: It's only "install it in the first place with the wizard" or "upgrade it".

I downloaded various packages from http://packages.ez.no/ezpublish/4.5/4.5.0/ and installed them. I activated the extension and can add the new "layout" datatype to any class (e.g. my frontpages). I also applied the SQL stuff from the ezflow extension to create the new ezm* tables.

But the layout only shows one zone ("Global Layout") or no zones at all, when i edit the class or the object with a "layout" datatype. zone.ini and block ini files look fine to me. But i muss the other layouts (2,3,4 zones).

Is there any good documentation available or do you have a clue where to look for? Log-Files do not give any usefull hint.

Marco
http://www.hyperroad-design.com

SEBBANE Alexandre

Saturday 04 June 2011 11:03:34 am

Hello

the zones are contentclass defined : see the zone.ini configration file

you should had your template write in it :

i mean if i want to had a lyout to the article contentclass , i add it bby administration AND i add it in this config file like that :

[GlobalZoneLayout]
ZoneTypeName=Global zone layout
Zones[]=main
ZoneName[main]=Global zone
ZoneThumbnail=globalzone_layout.gif
Template=globalzonelayout.tpl
AvailableForClasses[]=global_layout

AvailableForClasses[]=article <- add this line for your content class on all zoning you want.

i hope that helps you.

Alexandre

Paris, France

Marco Zinn

Saturday 04 June 2011 3:39:17 pm

Hello Alexandre,

I thought, i had read every line of those 2 INI files, but i overlooked that one.

AvailableForClasses[]=my_class_identifier

worked perfectly!

Merci beaucoup!

Marco
http://www.hyperroad-design.com